 NET232-DTE (male)
Serial RS232 to TCP/IP Ethernet
Intelligent Cable Adapter
DESCRIPTION:
The NET232 is an intelligent plug-and-play RS232-to-Ethernet cable adaptor that
enables any device or machine with a serial port, to become Ethernet network and
Internet enabled. Go from TCP/IP to serial with the NET232.
It features a powerful built-in device server, so you can access your serial device from anywhere in the world over
internet! The NET232 is easily configured via a web page, and can also be
set up through the serial port. You can use DHCP, AutoIP or assign a Static IP address to the NET232!
There are two basic modes of operation,
"Redirector" and "Serial Tunneling".
Redirector Mode:
In Redirector Mode, only one NET232 is needed per
serial device. ComPort Redirector Software (free with purchase) is
installed on your Windows PC to create a "virtual" COM Port (e.g. COM3).
You can then use this COM port in your Software application just as you would
any physical COM port attached to your PC. Create a virtual COM Port for
every NET232 device on your network and connect to them all from a single PC!
Serial Tunneling Mode: In Serial
Tunneling mode, two NET232's are used to create a "Serial Tunnel" over Ethernet.
This can be thought of as cable replacement. Each NET232 is configured to
have a remote IP address that is the other NET232 in the pair. No software
is required to be loaded on a PC. This is also an excellent option for
non-windows PCs or computers. Now you have an infinite length RS232 cable
that is connected over the internet.
FEATURES:
Local or Worldwide Ethernet 10/100M or Internet Connection
Serial baud rates (300, 600, 1200, 2400, 4800, 9600, 19.2k, 38.4k, 115.2K,...921.6K)
Ethernet activity, Power LED's
Web Server, configuration and user pages
DB9 12" molded cable DTE (male), female adapter included
Included AC Power adapter, 500mA @ 9VDC (Terminal Block available)
Encrypted Version available
Plastic housing
OEM versions available for small minimum quantity
Includes CD with Manuals, PC Setup and Virtual COM Port
Redirector Software
SPECIFICATIONS:
|
Serial Interface |
|
Data Rates |
300 bps to 921,600 bps |
|
Characters |
7 or 8 data bits |
|
Parity |
odd, even, none |
|
Stop Bits |
1 or 2 |
|
Control Signals |
DTR/DCD, CTS, RTS |
|
Flow Control |
XON/XOFF, RTS/CTS |
|
Connector |
DB9 - DTE (male). Null Modem adapter
included. DCE (female) and custom cables/connectors
(call) also available |
|
Network Interface |
|
Interface |
Ethernet 10Base-T or 100Base-TX (Auto-Sensing) |
|
Connector |
RJ45 |
|
Protocols |
TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, and AutoIP |
|
Indicators (LED) |
- 10Base-T connection
- 100Base-TX connection
- Link & activity indicator - Full/half duplex
- Power
|
|
Management |
- SNMP, Telnet, serial, internal web server, and Microsoft Windows®-based
utility for configuration
|
|
Security |
- Password protection
- Optional 256-bit AES Rijndael encryption
|
|
Internal Web Server |
|
Storage Capacity |
384KB for web pages |
|
Architecture |
|
CPU |
Based on the DSTni-EX enhanced 16-bit, 48MHz or 88MHz, x86 architecture |
|
Memory |
256KB SRAM and 512KB flash |
|
Firmware |
Upgradeable via TFTP and serially |
|
Power |
|
Input Voltage |
8-24 VDC |
|
Packaging |
|
Dimensions |
63.5 x 42.67 x 20.17mm (2.5 x 1.58 x .794 in) - Case
without Cable |
|
Weight |
92 g (3.2 oz) - Approximate, Without Power Supply |
|
Included Software |
|
MS Windows®-based DeviceInstaller software device installer
and MS Windows-based Comm Port Redirector |
DOCUMENTATION:
NET232 Data SheetNET232 User ManualRedirector User GuideSerial RS232/NET232 Product FAQ
![[Request A Quote]](http://site.gridconnect.com/web/blue_quote_button_ie.gif) For Volume Pricing. |
![[Search]](http://site.gridconnect.com/web/gridsb01_ie.jpg){kind=small}
